Curtain Fair Custom Window Treatments

Shower Curtains

Shower Tracks

Architectural Tracks

Cubicle Tracks

Cubicle & Drapery Fabrics


	Home
	Place An Order or Request A Sample
	About Us
	Privacy Statement
	Contact Us
	Links
	Site Map

ADO Glide
Ceiling Mounting Instructions

Typical Tools Required

Bracket Locations

1) Determine the desired distance from the window you would like the panels to hang.

2) Locate one mounting bracket close to location of your operating cord.

3) Space the remaining brackets out approximately 20" on center along the entire width of the track.

Bracket Installation

1) Pre-drill the hole locations determined in step one.

2) Insert appropriate wall anchors if needed

3) Screw brackets in place with the vertical leg pointing downwards

Track Positioning

1) Position track in place where it is centered with the window, the stacking position is as desired and the operating cord is on the correct side.

Track Attachment

1)Insert the front edge of mounting bracket under the slot on the top side of the panel track.

2) Carefully push up on the back side of the panel track until it snaps into place.

Fabric Panel Attachment

1) Line up the edge of the fabric panels with the carriers and attach each fabric panel to the individual track carriers as shown.

2) Slide the aluminum weight bars provided into the hemmed pockets along the bottom of each fabric panel.

3) Check to ensure that all mounting brackets along the track width have properly snapped into place.

4)Position each half of the cord weight over the operating cord and slide the two pieces together with the lead cylindrical weight in its place.