Bracket Installation

1) Pre-drill the hole locations determined in step one.

2) Insert appropriate wall anchors if needed

3) Screw brackets in place with the vertical leg pointing downwards

Bracket Assembly

Track Attachment

1) Position track in place where it is centered with the window, the stacking position is as desired and the operating cord is on the correct side.

2) Insert the front edge of the mounting bracket under the slot on the top side of the track

Fabric Panel Attachment

1) Line up the edge of the fabric panels with the carriers and attach each fabric panel to the individual track carriers as shown.

2) Slide the aluminum weight bars provided into the hemmed pockets along the bottom of each fabric panel.

3) Carefully push up on the back side of the panel track until it snaps into place.

4) Check to ensure that all mounting brackets along the track width have properly snapped into place.

5) Position each half of the cord weight over the operating cord and slide the two pieces together with the lead cylindrical weight in its place.